PRODUCT DETAILS

MARA

Material: Stainless steel

Grade: 201, 304, 316, 32205

Standards: ASTM A240 / A 240M, ASME SA – 240 / SA-240M, EN 10088

Finishes: Mirror Finish, smooth, shiny & reflective

Applications:

  • Kitchen equipment
  • Architectural- cladding and interior decorations
  • Facades

Mirror Finish – Also known as a #8 finish. This finish is produced by polishing with at least a 320 grit belt or wheel finish. Care will be taken in making sure all surface defects are removed. The part is *sisal buffed and then colour buffed to achieve a mirror finish. The quality of this finish is dependent on the quality of the metal being polished. Some alloys of steel and aluminium cannot be brought to a mirror finish. Castings that have slag or pits will also be difficult, if not impossible, to polish to a #8. Apply polishing compound sparingly to the face of a revolving buffing wheel. Repeat application of compound as needed during the buffing and polishing operations. Use only slight pressure in applying the revolving buff to the work surface, thereby allowing the buffing wheel and the polishing compound to do the work.

Advantages – shatterproof mirror panels can be achieved. Corrosion resistance is improved since the surface is quite smooth, limiting the opportunity for contaminants to react with the materials.

Disadvantages – typical processing leaves a degree of visible buff lines in the surface.

MIRROR FINISH
 THICKNESS WIDTH  LENGTH
0.5 – 20MM 1.2m. 1.5m 6M

    ​Head Office
  • P.O. Box 13650, Phase II,
    Dubai Investment Park,
    Dubai, U.A.E.

  • info@hidayath.com
  • Tel:+971 4 885 7700
  • Fax: +971 4 885 7070